Sewing Machine Feet

• To achieve the best results with your sewing machine, you need to use the correct foot for the task at hand. Whether inserting a pintuck embellishment or attaching a button, the correct foot will be critical to the final results.

• Whether your machine takes Low, High, Slant, or Super High Presser feet, Sew Fancy carries Generic or Manufacturer Brand Sewing Machine Feet.

LOW	HIGH	SLANT	SUPER HIGH




• We also carry ADAPTERS that allow you to use low-feet on high-machines.

INDEX OF PRESSER FEET

BUTTONHOLE FOOT
Make perfectly even buttonholes every time with an adjustable buttonhole foot. Just set the foot to the same mark on the foot and it does the rest.
NF-015 High Shank ... $7.95
NF-016 Low Shank ... $7.95

BUTTON TEMPLATES
Make buttonholes fit the button! Simply slide these lightly magnetic sized templates into the buttonholer above and you know the size will be perfect! Automatically measures 1/2" to 1" buttons.
NF-007 ... $4.99

BUTTON SEW-ON FOOT
Now that you’ve made the buttonholes so perfectly, you need to sew them on - by machine! This foot will hold any 2 or 4 hole button in place while you sew it in place. (hint - use a drop of Fray-Check to secure the threads and the button won’t come off)
NF-012 Low Shank ... $5.00
NF-013 Slant Shank ... $5.00
NF-014 High Shank ... $5.00

HEMMER FOOT
Make perfect little rolled hems on your regular machine with the hemmer foot. Edges of ruffles, even chiffon scarves and napkins will turn under beautifully with this foot.
NF-028 High Shank ... $7.00
NF-029 Low Shank ... $7.00
NF-030 Slant Shank ... $7.00

FLAT FELL FOOT
Used by David Page Coffin in his book Shirtmaking, this foot is indispensable when making garments that require flat-felled seams. The foot neatly turns the raw edge under at a consistent width. Two widths to choose from.
NF-024 Low Shank 4 mm ... $18.50
NF-023 Low Shank 6 mm ... $18.50

ZIPPER FOOT
For zipper application and also to make and insert piping. A set screw in the back makes this foot completely adjustable from far left to far right.
NF-062 High Shank ... $6.00
NF-063 Low Shank .... $6.00
NF-064 Slant Shank ... $6.00

SHIRRING FOOT
To gather single layers of light to medium weight fabric. Just lengthen your stitch and straight stitch. The foot holds the fabric enough to cause it to shir. For best results, hold your finger in the back against the foot to keep the fabric gathering .
NF-050 Low Shank ..... $7.50
NF-051 Slant Shank ... $7.50

GATHERING FOOT
Similar to above, but intended for gathering two layers, the top layer will gather effortlessly to the bottom layer, which remains flat. Just insert the top layer between the flanges and run the bottom layer underneath the foot.
NF-025 Low Shank ... $10.00
NF-026 Slant Shank ... $10.00

CORDING FOOT
For couching over all kinds of decorative threads and cords. The cord guide on the foot keeps the cord or thin ribbon where you want it allowing you to straight stitch or zigzag over it with ease
NF-020 High Shank ... $8.95
NF-021 Low Shank ... $8.95
NF-022 Slant Shank ... $8.95

MULTI-CORD FOOT
Similar to the above foot, but capable of taking 5 different cords or decorative threads and keeping them all separated and under control. Each thread has its own hold to feed through.
NF-102 Low Shank ... $22.50

PIPING AND PEARLS FOOT
Sew over cross-locked beads and heavy cords or piping with ease! The large groove under the foot allows lots of room for strings of pearls or whatever to travel through, and you can use your zigzag stitch to secure them.
NF-040a Low Shank ... $20.00
NF-040b Snap-on ........ $20.00
NF-041 Slant Shank ... $20.00

TEFLON FOOT
A coating of Super smooth Teflon on the sole of this foot makes it glide over leathers, rubbery fabrics or anything else that gives a metal foot a hard time.
NF-056 Low Shank ..... $11.00
NF-057 Slant Shank ... $11.00
NF-055 High Shank .... $11.00

SEQUINS/ELASTIC/RIBBON FOOT
Sew on sequins, braid, or elastic with ease. The adjustable width ribbon holder keeps the trim feeding evenly through the foot. Quality guaranteed to be the best on the market.
NF-065 Low Shank ... $22.00
NF-066 Slant Shank .. $22.00
NF-067 High Shank ... $22.00

PINTUCK FOOT
This foot really makes sewing pintucks a breeze. Use with a double needle and two threads in any machine that threads front to back. Simply sew a straight or curved line on your fabric, then insert the finished pintuck into the groove on the underside of the pintuck foot. The groove acts as a guide to keep the next tucks parallel to the first.
NF-042 High Shank ... $7.00
NF-043 Low Shank .... $7.00
NF-044 Slant Shank ... $7.00

OPEN TOE FOOT
This foot makes rolling and whipping seem like child’s play. I love it for any kind of appliqué or embroidery where I need to see what I’m doing (which is most of the time!). Once you use an open toe foot, you’ll wonder how you got along without it.
NF-034 High Shank ... $7.00
NF-035 Low Shank .... $7.00
NF-036 Slant Shank ... $7.00

ROLLER FOOT
Use to evenly feed fabric through your machine. Handles napped or slippery fabrics such as silk, leather, velvet, vinyl, velveteen, corduroy etc. with ease. The metal roller will not imprint the fabric.
NF-045 High Shank ... $7.00
NF-046 Low Shank .... $7.00
NF-047 Slant Shank ... $7.00

BLINDSTITCH/EDGESTITCH FOOT
Use this foot for perfectly accurate topstitching or edgestitching. Special adjustable guide prevents fabric from slipping or moving around. This foot is especially good around collars and on yokes.
NF-009 High Shank .. $10.95
NF-010 Low Shank ... $10.95
NF-008 Snap-on ........ $10.95 out of stock
NF-011 Slant Shank .. $10.95

OVERCAST GUIDE FOOT
Overcast on fabric edges with a smooth, non-puckering stitch. Use with a zigzag machine to sew beautiful overcast edges on both knits and wovens. The built in stitch finger keeps the edge of the fabric from rolling in.
NF-037 High Shank ... $8.95
NF-038 Low Shank .... $9.95
NF-039 Slant Shank ... $8.95

INVISIBLE ZIPPER FOOT
The secret to inserting a concealed or"invisible" zipper lies in stitching as close as possible to the zipper feet without catching them. That’s hard to do because the zipper coil wants to roll over the tape just where you want to stitch. This metal foot has grooves underneath that keep the coil away from the needle for close, accurate stitching.
NF-017 High Shank ... $9.98
NF-018 Low Shank .... $9.98
NF-019 Slant Shank ... $9.98

FRINGE/TAILOR TACKER FOOT
The projection in the centre of the foot on the Tailor Tacker or fagotting foot causes the thread to hop over it, making a very long stitch with loops on the upper surface. The fabric layers can be spread apart and the threads snipped between them. The threads in both pieces of fabric now serve to mark pattern details. Also useful to do machine faggotting, fringing and chenille appliqué.
NF-052 High Shank ... $16.95
NF-053 Low Shank .... $16.95
NF-054 Slant Shank ... $16.95 SPECIAL $9.98 - plastic so you can see clearly

1/4" PATCHWORK FOOT
This foot allows you to do perfect 1/4" seams, or 1/8" seams for miniatures and to pivot on exactly the 1/8" or 1/4" mark. For those truly fussy about their seam allowances. Comes with a guide bar.
NF-004 High Shank ... $16.00
NF-005 Low Shank ... $16.00
NF-006 Slant Shank ... $16.00

FREE MOTION FOOT
For free-motion embroidery (try it - it’s fun!) or Stippling in Machine Quilting you need a free motion foot for it all. The open area of the foot offers excellent visibility and the size of the contact area gives you more surface contact with your fabric.
NF-068 High Shank ... $16.00
NF-069 Low Shank ... $16.00
NF-070 Slant Shank ... $16.00

LACE JOINING FOOT
Also known as the edge joining foot, this foot is useful for joining two edges that need to be butted together and sewn, as in the case when joining laces in heirloom sewing. The middle projection keeps the two edges from overlapping.
NF-031 High Shank ... $22.50
NF-032 Low Shank ... $22.50
NF-033 Slant Shank ... $22.50

FLOWER STITCH FOOT
Even if you don’t have a fancy embroidery foot (or even if you do!) you’ll love the way this fancy ringer foot produces unlimited flower shapes just by adjusting the dial and varying the thread type. Any low shank machine can use this foot even a straight stitch, because the foot turns the fabric, not the needle bar.
NF-103 Low Shank ... $31.98

'V' for Velvet
Special foot for sewing on velvet and other high nap textiles. This accessory provides control on straight seams as well as curves when sewing with high nap textiles such as velvet, velveteen and other hard to control nap textiles.
NF-105 European Snap on.....$24.95 On sale for $15.98

1/4" Quilting Foot
For perfect 1/4" seaming every time. The right edge is a scant 1/4" from the center needle position, os it's ideal for machine piecing. The wider left toe, is a scant 3/8" from the needle which provides better fabric feed control. It also has a red line 1/4" in front of and behind the center needle positon to aid in starting, stopping and pivoting. It also include a quilting bar for keeping an accurate distance from the previous line of stitching. A great foot!!!
NF-106 Slant.........$ 16.00
NF-107 Low..........$16.00

Embroidery Foot

A clear foot to improve visiblity. Has a trough down the middle for your satin and other embroidery stitches to follow.

NF-108 Low....$8.00

BERNINA ADAPTER BRACKET
Use this Bernina-manufactured adapter foot to convert any low-shank feet to your Bernina. Note that it does not adapt the 1630 or the new Artista series. Set screw included.
NF-086 ... $28.00

JANOME ADAPTER
With this adapter your Janome 8000/9000 and your Elna 9006 will accept any low-shank feet listed above.
NF-087 ... $10.95

HIGH-LOW ADAPTER
Use this high (machine) to low (foot) adapter to adapt ALL the low-shank feet for use on your Kenmore high-shank machine. The world of generic low-shank feet is at your fingertips. Includes set screw.
NF-088 ... $15.00

Bernina Zip Foot # 4

NF-090.....$49.98 on sale for $24.98 - one only

Spring Needle for Quilting and Darning
An attached spring eliminates the need for a presser foot when the feed dogs are dropped for free motion quilting
NF-091....Size 12.....$6.50
NF-092...Size 14......$6.50